All products
Qilu’s materials processing guidelines are designed to help customers with plate processing operations such as cutting, bending, welding, machining and heat treatment. Based on the results from extensive testing performed by our dedicated Research & Development Centre, the guidelines cover a wide range of industrial conditions and represent to the best of our knowledge, current practices in the industry.
Related models of Tool&Mould steel
Our mould steel products include the following models:
-
H13/1.2344
In steel H13, the molybdenum and vanadium act as strengthening agents. The chromium content assists…
-
D2/1.2379
D2 tool steel is a high carbon, high chromium tool steel (12% chrome) with extremely…
-
1.2714 Mould steel
1.2714 Low alloy special purpose steels or group L steels contain small quantities of chromium,…
-
D3/1.2080
D3 cold work steelhas very high wear resistance against abrasive and adhesive wear due to…
-
1.2842
AISI O2 tool steel is an oil hardening tool steel which is supplied in the annealed condition…
-
O1/1.2510
O1 tool steel has deep hardening properties with fine grain structure with unusual toughness. AISI…
-
H11/1.2343
H11 tool steel consists of less vanadium than the commonly used H13 hot work tool…
-
H10/1.2365
H10 tool steel is one hot works tool steel in ASTM A681 standard, which is for alloy tool steel.…
-
1.2367 Mould steel
1.2367 Chrome–molybdenum–vanadium steel for hardening in oil and in air with very good hardenability, high…
-
T8 Mould steel
T8 Mold steel is a tungsten-cobalt-vanadium high-speed tool steel.Tool steels are high quality steels developed…
-
T10 Mould steel
T10 Mold steel is high-speed tool steel made of carbon and Tungsten. The T in…
Industries and uses of alloy steel
- Car parts
- Oilfield equipment
- Mechanical Engineering Industry
- Gear Components and Gears
- Aerospace
- Military industry
- Moulds for plastic materials
- Chromium steels for machine structure use