60SiCr7 Spring steel

5/5

Spring steel DIN 17221 60SiCr7 is a kind of pre-hardened material well suited for fabrication requiring shaping by blanking, bending, drawing, extrusion and swaging. Spring steel DIN 17221 60SiCr7 allows for closer dimensional tolerances and improved finish and available in several grades. Grade selection is important when considering higher levels of wear resistance.

DIN 17221 60SiCr7 spring steels are mainly used for the manufacture of railway rolling stock, cars and tractors on the leaf spring and coil spring, the safety valve spring, shock absorber on a variety of heavy machinery, instrument springs, friction plate.

Categories ,
TOCT 14959 DIN 17221 GB/T 1222 NF A35-571 ISO 683-14 ASTM JIS G4801
A29M A322
60C2T

60C2A

 60SiCr7

 

 60Si2Mn

 

 61SiCr7

 

 59Si7

 

 9260

 

 G92600

 

 SU P6

SU P7

60SI2MN steels, Highlight the advantage is good hardenability, another hot working performance, comprehensive mechanical properties,

Decarburization resistance is also good big cross section of various important spring, such as automobile, locomotive, large plate spring, spring, etc. 60SI2MN Spring main used for heavy vehicles, tractors, industrial production load, stress and the diameter of the larger plate spring and helical spring

C Si Mn Cr p S Ni Cu
0.56-0.64 1.50-2.00 0.60-0.90 ≤0.35 ≤0.035 ≤0.035 ≤0.35 ≤0.25
  • Annealing of 60SI2MN Spring Steel

Slowly heated to 740-770 ℃ and allow enough times, let the steel to be thoroughly heated, Then cool slowly in the furnace. The 60SI2MN tool  steel will get MAX 250 HB （Brinell hardness）.

  • Hardening of 60SI2MN Spring Steel

60SI2MN steels should be heated uniformly to 830-860°C (1526-1580°F) until completely heated through. About 30 min per 25 mm of ruling section is to be provided and then the steels should be immediately quenched in oil. Get Hardness 61 Min.

  • Tempering of 60SI2MN Spring Steel

Tempering of 60SI2MN steels is performed at 480-530°C, Soak well at the selected temperature and soak for at least one hour per 25mm of total thickness. Hardness values at different temperatures after tempering HRC: 150°C-61HRc,200°C-60HRC,300°C-56HRC,400°C-51HRC,500°C-43HRC,550°C-38HRC,600°C-33HRC,650°C-29HRC.

The mechanical properties of 60SI2MN Spring Steels are outlined in the following table.

Tensile strength Conditions to yield strength Elongation Reduction of area Hardness (Hot Rolled) Hardness (Cold Drawn)
σb (MPa)：≥1274(130) σ0.2 (MPa)：≥1176(120) δ10 (%)：≥5 ψ (%)：≥25 ≤321HB;

Reviews

There are no reviews yet.

Be the first to review “60SiCr7 Spring steel”

Your email address will not be published. Required fields are marked *

Products Recommended

Contact Information

We have professional relevant personnel and will do our best to solve your problems, please be sure to contact us.

  • Phone:-86-0537-3430089
  • E-Mail:[email protected]
  • Yanzhou building,Economic zone,Yanzhou,Jining,China

Contact Us

We have professional relevant personnel and will do our best to solve your problems, please be sure to contact us.

Navigation

About Qilu

Qilu Steel is a professional company integrating the research and operation of special steel forgings. 

Download Center

Search and download QILU’s brochures, certificates and other materials.

Become our partner

We welcome like-minded friends to join our big family, and wish us to become sincere friends abroad.

©2020 Easyseo. All rights reserved

Get a fress estimate: +86-0537-3430089

Facebook
Twitter